First, boot initialization

Before operating the CNC turret punch press, it is necessary to initialize the power-on operation first, the specific steps are as follows:

1. Press the start button and enter the standby state after the self-test of each motor and hydraulic system is completed.

2. Enter the password and log in the numerical control system according to the requirements on the screen of the machine, and enter the main interface.

3. Carry out the relevant parameter settings, including fixture position, cutting speed, depth of cut, etc., for subsequent operation.

Second, programming

Programming is an important step in the operation of CNC punch press, mainly including the following:

1. Select the graphics to be cut and program and simulate in the CNC system.

2. Test, modify and adjust according to the program prepared to ensure the accuracy and stability of the program.

3. Input the prepared program into the machine through USB or other means for subsequent operations.

III. Fixture Installation

Before the cutting operation, you need to place the workpiece in the fixture, and adjust and install the fixture.

1. Install the tool or mold on the fixture, paying attention to the direction and angle of the tool to ensure the cutting quality.

2. Carry out the position and height adjustment of the fixture to adapt to different workpiece cutting needs.

IV. CNC turret punch press Tool Replacement

In order to ensure the normal operation of CNC machine and punching effect, you need to regularly replace the tool.

1. Pick the right tool on the tool board and set and adjust it in the system.

2. Tighten the nut of the tool and adjust the direction of the tool as required to ensure normal cutting.

V. Safety Precautions

In the operation process of CNC punching machine, you need to pay attention to the following safety operation norms:

1. Ensure that the machine parts are running normally before operation, and carry out necessary safety protection measures.

2. Keep the operation area neat and clean, avoid debris and personnel to interfere with the normal operation of the machine.

3. Use gloves, goggles and other necessary personal protective equipment to avoid danger.

The above is the detailed steps and precautions for the operation of CNC turret punch press. Only correctly grasp the operating method, and strengthen the maintenance of the machine, in order to ensure the normal operation of the CNC machine and processing results.